Skip to content
Products
Surge Protection devices (SPD)
Power Line SPDs
DIN RAIL – IEC TYPE 1
DIN RAIL – IEC TYPE 1+2
DIN RAIL – IEC TYPE 2
DIN RAIL – IEC TYPE 2+3
DIN RAIL – IEC TYPE 3
Power Line SPDs with Grounding monitor
DIN RAIL – IEC TYPE 2 w/GM
Signal line SPDs
Data Networks – Ethernet
Measurement and Control
Radio Frequency
Telephone Lines
Photovoltaic & Energy Storage SPDs
DIN RAIL – IEC TYPE 1+2 PV
DIN RAIL – IEC TYPE 2 PV
DIN RAIL – IEC AC Reinforced
LED Lighting SPDs
DIN RAIL – IEC TYPE 2+3 for Fusebox
Outdoor LED – Luminaire – TYPE 2+3
External Protection – Capture system & accesories
Capture system – Air terminal
Adaptor
Down conductor system
Earthing system
Counter, meter, tester
Power Frequency Overvoltage Protection Devices
SPD+POP incl. MCB
SPD+POP+Autorecloser
POP incl. MCB
SPD+POP
POP
E-Mobility Overvoltage Protection Devices
EV SPD+POP+Autorecloser
EV SPD+POP
Power monitoring
Grounding system monitor
Insulation monitoring device
Solutions
About us
Resources
News
Contact
EN
ES
FR
Products
>
External Lightning Protection - Nimbus®
External Lightning Protection - Nimbus®
Capture system - Air terminal
Adaptor
Down conductor system
Earthing system
Counter, meter, tester
Adaptors
Connection of lightning rod to down conductor.
Clamps for Earthing Sys
Clamp to fix the down conductor.
CDR-401
Lightning discharge counters.
Masts for lightning rods
Assure an appropriate coverage of the lightning rod by adding height.
NIMBUS
Lightning rod with streaming device (ESE).
Earth electrodes
Conductor to establish a direct earth connection.
Mast anchorages
Anchorages for wall or roof, for subjection of lightning rod masts.
LR-TESTER
nimbus® tester for ESE early streamer emission internal circuit.
NIMBUS R
Remotely testeable lightning rod with ESE tecnology.
Trestle towers
Trestle tower with guy wires included, for the elevation of the lightning rod.
Ground connection and equipotentiality
Protect from accidental electric discharges by connecting 2 metal surfaces.
G-TEST
Tester to measure residual ground voltage, resistance and resistivity
Air terminals
Franklin type lightning air terminals.
Earth enhancing compounds
Additives that increase the conductivity in soils with high resistance.
Free standing pylons
Pylons with concrete foundation, to rise the lightning rod over the ground level.
Clamps for down conductor Sys
Clamp to fix the down conductor.
Supports
To fix the down conductor along its trajectory and avoid any movement.
Down conductors
Parts to arrest lightning current from air terminal to earth/ground.
Connecting sleeves
To disconnect the grounding system and measure the resistance.
Protection pipes
To avoid mechanical shocks on the down conductor.
Spark gaps
Spark gap for equipotential bonding of the down conductor system.