Archivo de Noviembre de 2009

Volver

CPS BLOCK meets 3rd Edition of UL 1449

Viernes, 20 de Noviembre de 2009

Modular Surge Protective Panel (UL 1449 3rd Ed)

CPS Block is a range of TVSS surge protection panels for all-mode protection (L-G, N-G, L-N, L-L) against transient surges according to UL 1449 3rd Ed.

Surge modules (blocks) are individually replaceable per mode once they reach their end-of-life. A specific model is available for each network configuration and voltage rating.

CPS Block is Cirprotec’s range of value-added TVSS protectors which stands out above all other TVSS products thanks to the perfect combination of an innovative and useful approach to diagnostics along with a most robust surge protection performance, meeting even the Imax heavy duty test of IEC-61643. All models are equipped with following features: IAC Intelligent Aging Control (module remaining % of protection), MDS Multi-Discharge System (thermal-mechanical disconnection of each MOV) and EPM Efficient Preventive Maintenance (easy replacement of surge modules).

This results into following advantages and benefits:

The Max. Surge Current per phase (performance parameter) covers a standard range from 40 kA up to 240 kA, always suppressing transients with an optimal VPR voltage protection rating (known as clamping voltage in 2nd Ed UL 1449), hence  offering effective protection to equipment downstream. The level of exposure and the type of application serve as a guide to the selection of the Max. Current parameter. Systems are either suited for installation (parallel) at the service entrance (IEEE “C location category”), the distribution panel  (IEEE “B location category”) or a branch panel (IEEE “A location category”).

Remote diagnostics is standard (dry contacts). Optional features in this range are: EMI/RFI filter (a.k.a. sinewave tracking), Surge Event Counter and NEMA Type 12 enclosure.

CPS Block systems do also meet these standards: UL 1449 2nd Ed., IEC-61643 and IEEE C.62.41.1 & C.62.41.2 2002.

CPS BLOCK adaptado a la 3ª edición de UL 1449

Domingo, 15 de Noviembre de 2009

Supresor Modular de Picos Transitorios de Tensión (UL 1449 3ª Ed)

CPS Block es la gama TVSS de supresores para protección “all-mode” (L-G, N-G, L-N, L-L) contra picos transitorios de tensión (voltaje) y ha sido diseñada según UL 1449 3ª Ed.

Los módulos de protección (blocks) son reemplazables de forma individual tras alcanzar su fin de vida útil. La familia contempla modelos específicos para cada tipo de configuración de red y tensión nominal (voltaje).
CPS Block constituye la gama de alto valor añadido de supresores TVSS de Cirprotec, sobresaliendo por encima de los demás sistemas del mercado gracias a la combinación del innovador sistema de diagnóstico con un rendimiento óptimo en protección contra sobretensiones, cumpliendo incluso con el test de alta resistencia Imax de IEC-61643.
Todos los modelos están equipados con las siguientes características: IAC Control Inteligente de Envejecimiento (% de protección disponible por módulo), MDS Sistema Multi-Descarga (Desconexión Termo-Mecánica de cada MOV) y EPM Mantenimiento Preventivo Eficiente (sustitución fácil de los módulos de protección).

De ello derivan las principales ventajas y beneficios:

La Máx. Capacidad de Descarga por fase (parámetro de rendimiento) cubre un rango estándar de 40 kA a 240 kA, ofreciendo óptimos niveles de supresión (VPR voltage protection rating o Clamping voltage según 3ª y 2ª Ed UL 1449 respectivamente) y, por lo tanto, protección efectiva a los dispositivos situados aguas abajo.

El nivel de exposición y el tipo de aplicación sirven como guía para la elección del parámetro de máxima capacidad de descarga. En este sentido los sistemas se emplean en 3 categorías básicas de ubicación, conectados en paralelo a la instalación: acometida (IEEE “ubicación de categoría C”), cuadro de distribución (IEEE “ubicación de categoría B”) o tableros secundarios (IEEE “ubicación de categoría A”).
El diagnóstico por monitorización remota es estándar (contactos secos de relay). Las características opcionales son: filtro EMI/RFI (seguimiento de onda), Contador de Eventos Transitorios y caja estanca NEMA 12.

Los sistemas CPS Block cumplen también con los estándares: UL 1449 2a Ed IEC-61643 e IEEE C.62.41.1 & C.62.41.2 2002.